https://aaacards.blogspot.com has a CAS sketch challenge and this is what I came up with for my card. It was also inspired by a magazine cover that I liked and thought would make a good background for a card. I may do a full background one of these days, but for the purpose of this challenge I kept it as a vertical stamped section. I masked off both sides of the card and sponged Tea Dye ink first. When it was mostly dry I added all the little images using stamps from an older Claire Brennan/GKD set in BluePrint Sketch, Peeled Paint and Ground Expresso. Once the two sentiments were added I cut the panel down just a bit and added it to the note card.

I quite like the end result and for once I managed to get my masking done correctly. Thanks for stopping by and I hope you have a great weekend.

I rarely do splatter although I like it when I see it on cards created by others. When I look at this one I see why I don’t do it often. To me this looks like a hot mess, but knowing others may not agree is the only reason I’m posting it. To make the card I used my new StampinUp every day details stamp set and dies. I like how the dies create the little border holes on the circles. I decided to cut first and then stamp but it may have been better to do it the other way around. I stamped the birds nest with eggs and used another set by YNS to stamp the little bird on the branch which came from a GKD set. Colouring is mix of ink and watercolour pencils. The sentiment came from a set by the Cats Pajama’s. I added everything flat except for the sentiment circle which is popped up on foam tape. Then I tried to add the splatter. First attempt the ink didn’t show enough so I added a darker colour along with a bit of sparkle spray and tried again. As you can see I got ink everywhere some in large blotches. I shall have to practice this technique before I add it to another card.

The card is made for two challenges:

https://seizethebirthday.blogspot.com and https://sundaystamps.blogspot.com/

Thanks for taking a look and thanks too for any comments you may leave. They are appreciated more than you know.

The mood board at Double D has a colour in the bokeh that inspired me to use this new StampinUp Paper I have just received. I decided to keep my background almost monochromatic and the card base is a similar tone. The sentiment stamp is also StampinUp and a new set to me as of Monday. The little image is from a YNS set and I can now say I’ve used all the images and most of the sentiments from this set. I coloured the image mostly with Prisma pencils and added some Sakura sparkle to the rings, flower center, heart border and martini. The photo makes the gold on the rings look green. The background heart plate is from SSS, and the larger heart used for the sentiment is from Hero Arts.

I’ve decided to add this card to the following challenges:

Heartfelt Challenge – https://daranddiane.blogspot.com/

Challenge #159 “Love Is in the Air” partnering with Color Dare 586 dare not taken.

Thanks for stopping by and I hope you all have a great day.

The new challenge here at cardz4galz and chosen by Dawn is all about sequins and she will also be choosing the winners. After some thought and initially wondering whether a shaker card would be the way to go, I decided to try something different. I had seen a crafter using sequins behind a die cut shape and I took my card somewhat in that direction. In my case I already had the heart on my desk as it came from a different project and I decided to try covering it with the sequins. Believe it or not this work was done in the middle of a night where I couldn’t sleep and it actually helped me to calm my brain enough to get to sleep when I returned to my bed. Not having a huge selection of sequins in different colours I used just the pink ones on my heart. When I looked at it again the next morning I realized there were a few white gaps, which I didn’t care for, so anyone having a go at this style should make a note to pre colour their shape or use coloured CS. What I did to improve mine was to spray it with a Distress Mica spray. It wasn’t the same colour but I tested it beforehand and decided it would still work. My sequins did hold some of the spray so a few look a bit more red than pink, but on the whole it was a good solution. The heart was adhered to a small panel that I had covered with a scrap piece of very dark pink mulberry paper, which looks much darker in the photo than it does on my desk. It needed something more so I went through my stash and found some small keys I had purchased and then never used. I chose the one with the pink to keep the colours together and carefully glued it. As I don’t have many sentiments in this vein, I composed my own on my computer and printed it. Backed it with a piece of the pink CS used behind the main panel before adding it as you see. It took me a few minutes to decide how I wanted to use the pink piece and eventually I found I preferred the slight angle orientation for both the background and main panel. The card front is a shimmer white CS that adds another layer of shine.

I’m adding this card to the following challenge: https://colorfuloptions.blogspot.com/ PINK.

I’m looking forward to seeing your creations in our gallery. Thanks for stopping by and thanks too for any comments you leave me. They are always appreciated.

I shall start my post by saying I’ve made several new purchases lately and the die used here is one of them. It came from Kokorosa Dies. Some of my other newbies will get used but not today. As to my craft room size, my hubby had my space customized for me not that long ago and already I am out of space. Fortunately he is also artistic and has a studio of his own and I am able to store a few larger items there.

I kept my card very simple and without a sentiment for the time being. I may add one when I decide to use the card but most likely will just add something on the inside. I love the simplicity of black and white cards so basically the die cut was just added to the black note card. I added a couple of clear Trinity Stamp gems to the larger flower centers and used a glitter pen on the smaller ones for some added interest. I’m never sure if a card like this would be considered CAS although to me it is fairly clean and simple.

Thanks for stopping by. Your comments are welcomed and appreciated. Have a great day everyone.

Having been messing about with various designs recently I had this heart left from a project where I just needed the shaped aperture. I had scored the entire card prior to cutting so the cut out had the score lines as you see here. I added the red sequins down the center and then set it aside. Today I saw the challenge at Color Hues and decided that it would become part of a card for this challenge. A recent purchase gave me some small narrow embossing folders and I decided to try one. Using a scrap piece of this bright pink CS I added the embossing and thought it needed to stand out a little more. So I took my Aged Mahogany stamp pad and swiped over the raised parts. This is still in the colour tones of red, but on the photo it looks more gray than it actually is. Using a tiny sentiment stamp from a Lisa Elton set I stamped the word, went over it with a red glitter pen and added 2 tiny hearts from the same set. Glittered these as well. Rounded two corners using a punch and added it the panel. Note card is a shimmer white CS.

I’m not totally in love with this card although as so often happens it may grow on me later. Thanks for stopping by and also for any comments you may leave. I hope you are having a great day.

Instead of splitting my card using paper I chose to do it with a die that works best on the diagonal. I then backed it with some glitter CS behind so that it twinkles through the openings. Using the same CS I die cut a small star using Hero Arts Infinity dies using foam tape to attach it. The sentiment is from a Joy Clair set and I heat embossed it in silver. I chose this particular sentiment as it gives me choices in how to use the card.

I’m happy with the end result and hope you like it too. Thanks for stopping by, you are appreciated in many ways.

Taking a white panel I decided where I wanted my heart to be and die cut it first. Then I took the panel back to my score board and scored as you see. Using a small scrap piece I added the rose bouquet using a Taperology rub on transfer. This was then placed behind the heart and I used foam tape to lift up the panel slightly. I used a pink card front similar in tone to the pinks in the transfer and added the panel to it. Then I stamped the sentiment from Joy Clair in black but it seemed a bit harsh so I softened it by stamping a few times using a silver pigment ink from Scrapbook.com. The sentiment strip was cut using a Spellbinders die and I added to Pops of Color dots to finish the card. As CAS as I can get and a pretty end result.

Thanks for stopping by, your time is appreciated as are any comments you leave.

For some time I’ve been wanting to try a fractured card design and decided that the current Make My Monday #218 challenge to use patterned paper, was the perfect forum for me to attempt it.

Having won this stamp set by Lisa Elton, a DT at JUG’s, and because this style card needed small images, I figured it would be just right for my example. I’ve had the set for a few months and it was something else I’ve been wanting to use for a while.

I had this StampinUp paper in my stash and I paired it with some copper CS and a similar in tone, mirror CS for my fractured strips. The image was stamped and coloured using some Distress Oxide green inks with a border of Aged Mahogany hearts. When the ink was dry I added Nuvo Crystal drops to the peas for some dimension and shine. The sentiment was stamped and die cut using an unbranded rectangular set.

I’m quite pleased with the result and may try a few others using this technique quite soon. Thanks for stopping by, and any comments you leave are always appreciated.

I just purchased this die from Kokorosa as I had seen it a few times and liked it. It’s a great way to use up some PP actually. Anyway I pulled out some StampinUp DSP that I like and cut the frame and then I also cut some regular CS so I could give it some stability and dimension. The die comes with all the additional pieces so you can cut out smaller curved bits. Once I had built up my outer frame, I took all the fallouts and put them in order so I could add the other PP on top. Then I popped each one back into the section it came from. I ended up with a tiny amount of white showing here and there as it wasn’t easy to make them fit exactly. The initial frame bends out of shape just a little and I think this is the reason it was more challenging. That said it isn’t so bad that I would discard the card. The sentiment is from MFT and I had it from a previous project where I changed my mind because I found it a bit big. For this card is works well. I quite like the end result and it is a card than can be used for a male or a female.

Thanks for stopping by and thanks in advance for any comments you leave. I appreciate each and every one.