A few days ago, I cut a piece of card stock incorrectly so I ended up with a weird size. As it was already scored I set it aside knowing I would use it later, and later is now. Using two Kokorosa dies and some black CS I die cut both and then backed the piano with a small piece of holographic paper so there was a little bit of shimmer. I added the music notes first and then the piano after stamping the sentiment using a Joy Clair stamp. The tiny stars were cut using a Scrapbook.com set.
This is a very simple card, but it works nicely and can be used for male or female too. Thanks for stopping by, your time is appreciated.
Yesterday I posted to the As You See It speed challenge and after I had, I realized that perhaps I hadn’t met the challenge properly. The Challenge #355 – Lively Leaves clearly says speed stamping on the image and my card had no stamping on it at all. Given that AYSI is one of my favourite sites to enter I decided I had better make another one and this is it.
I started by using some inks on a plastic sheet and a wet brush and swiped the brush across the panel in curves at the corners and not bothering to be careful. Then I took the Altenew leaf sprig stamp and stamped the leaf over the top. This took several tries as my inks weren’t quite dry. Sentiment is from the same set. Using a new die set from Amazon, I proceeded to cut the layer and then did a second one in gold. Why dies don’t cut properly when we are hurrying always puzzles me, as I had to repeat the cut and then spend more time than I wanted on getting all the bits out of the gold layer. I did take time to add the enamel dots but they were easy compared to poking out the gold piece. Had the die cut properly my card would have been finished in 6 minutes (a record for me) but hey ho, it took more time and I finished the card in 8 minutes and 30 seconds.
I’m not sure I like the end result, as my colours are a bit darker than I wished, but when doing something for speed it is not easy to fix or change.
Thanks for joining me today, I hope your Sunday has gone well. Ours has been so hot being outside was virtually impossible, but we shall do a BBQ tonight and eat on the patio.
It has been a while since I had the time to enter into a Sunday Stamp challenge, but today I managed it. SSC367 Put A Bow On It is the theme and because I had been playing the past two days with using kitchen foil, alcohol inks and some leaf printing, in a way this card almost made itself.
I placed the leaf panel into a stitched rectangle unbranded die and cut it to size although it required some replacement of the die to achieve the length I wanted. Yesterday I had added some crumpled kitchen foil to some card stock and earlier today I played with adding inks to it. I quite liked how it ended up so using an Altenew die, I cut the leaf sprig you see here from part of it. After adding foam to the back I added it to my leaf print panel. The little tag is from a set that my hubby bought many moons ago and I didn’t keep the info on the 2 sets he gave me. The sentiment is from a SSS set and I heat embossed in gold. I found the red and gold thread in my box and by pulling the threads apart I was able to combine both and make a bow. A lot of blue air, as my fingers would not cooperate, but I managed in the end. After adding a bit of colour to the tag I attached it and using tweezers pulled a bit of the thread through the hole.
While playing I hadn’t really thought about a design for the finished panel, but I did have the Sunday Stamps challenge open on my computer and when I took another look at it, I realized I had the makings of a card to meet the challenge. As you can see I added a border of some CS that was similar in hue to the colours in the leaf and then using the leftover piece I added it to my card base so it fit the sketch. Once the top layer was added it met the theme perfectly.
I’m pleased with how it turned out and had fun playing with the inks although if you had seen the mess I made of my glass mat and fingers you would laugh. Fortunately a little alcohol on a sponge helped me to clean it all up easily. Many thanks for stopping by, your time and any comments you leave are truly appreciated.
As You See It has one of the ‘dreaded’ speed challenges currently, Challenge #355 – Lively Leaves and I literally made it just under the wire with this card. Earlier this week I had been playing with leaf printing and I had a piece already done, but I thought it might be considered cheating if I used it here. In the end I decided on this design and once I had chosen my dies, Pattern paper and card front sorted it wasn’t too difficult. What took time was trying to add foam to the back and I resorted to cutting a black piece of foam with the die but it took forever to poke out the bits and of course it stretched a bit in the cutting so that was a bit of an issue too. Next time I do this I’m going to glue the PP to the foam ahead of any cutting and cut them out as one piece, but that thought was too late for this card.
So the die used is from MFT, the background piece is from an ancient paper pad and I ensured the dragonfly was front and center before cutting. The sentiment was on my desk as it had fallen out of a small pack of ephemera and I decided to use it because I had forgotten to prepare a stamp ahead of time. I tried to match the card front to the tiny dots in the leaves.
I learned yesterday, that a close friend has had what appears to be a mild stroke, so I am going to send this card to her. They still don’t know whether it was a stroke for sure, so a barrage of tests have been done but she won’t get all the results for a few days. In the meantime they are allowing her to return home. She is a semi retired Geriatric nurse and her hubby is as well, so I guess they feel she will be okay at home while they pursue it further. Because they live in a small town up north, most of the complicated testing has to be sent to Vancouver so results take a while.
Thanks for stopping by, I appreciate you and your time.
It is my turn to choose the theme for the latest challenge #257 here at https://cardz4galz.blogspot.com/. My theme is that you use vellum and here is my example. I found a piece of pink vellum in my scraps and decided it would work well. I used a very old rubber block stamp and stamped the words using Versamark ink which I then heat embossed in gold. I wanted it to pop up a little so it took me some time to figure out how to add foam tape so it wouldn’t show but I managed it. I had a scrap piece of gold card and I used an unbranded stitched rectangle set to cut out a piece the right size. I couldn’t find a way to turn it into a frame using a die, so I carefully measured and then with a ruler and craft knife cut the inside to give me a frame the thickness I was hoping for. I used some foam tape around all the sides for dimension and added the vellum to it. Taking an old corner floral stamp from a GKD set and using a slightly darker pink than the CS I stamped each corner not worrying about any doubling up as I knew most of it would be covered. Taking a butterfly stamp from Crafters Companion and a piece of regular vellum I stamped 3 and heat set them using clear embossing powder. When it was cool enough I turned it to the backside and used some inks direct to the vellum. Let that dry, but it was taking a bit too long so I did use some heat to hurry it a bit. Fussy cut them out and added the bodies in black glitter using a small die from a StampinUP set. They were added to the frame as you see and I finished the card off with 3 gems from my stash.
I honestly wasn’t sure this was going to work or even be pretty, but in the end I am happy with the result. It does look better in R.L. than on the photo.
Thanks for spending time with me today. We hope you join us in our gallery and we look forward to seeing what you create.
On a dog walk yesterday I found a beautiful fall leaf that was mostly intact so I brought it home. Not having the time to play with it, I set it aside with a damp cloth on top so it wouldn’t dry out too quickly. This morning I decided to use it and while thinking about it, I also checked out the latest challenge at Double D. They were calling for butterflies so I decided to combine my leaf with a butterfly.
I cut a 6X6″ card then spent some time painting the back of my leaf with colour, which when done, I spritzed slightly before laying it in position on my card. Using the tool I generally use to press stamps in my Misti or Stamping wheel, I carefully ensured it was pressed fully onto the card. I left it for a minute or two and then gently peeled off the leaf and what you see here is the result. I did stipple a little bit of green with a brush. There was enough colour left that I was able to do another much smaller piece for use later. The sentiment comes from a Joy Clair set and my butterfly is die cut using scraps and a StampinUP set. I chose to use some green embellishments from my stash that came from a package purchased at Michaels a long time ago.
My hubby was so enamored with the leaf print that he stole the card from me before I put it together and proceeded to take photos of it. When I got it back I went around the edges with a brown Spectrum Noir marker and then added the rest. I have to say I’m quite pleased with the end result and the leaf sure makes an interesting texture on the card.
Thanks for spending time with me today, I appreciate you and your time.
above showing card standing upright left side it is lying flat.
Our friend, who is always so generous with her time and talent, has a birthday coming up soon. She is a keen gardener and I wanted to make her a special card. Having done a bench style card for my hubby earlier this year, I had the idea of making another in a garden theme. I returned to Sam at https://mixedupcraft.com/2020/06/13/cute-bench-fold-card/ and this time CASE’d her card. In my case I don’t have a garden stamp set or dies, but I did have some pieces cut from a store bought card that I had saved and with my new Spellbinders kit could make florals and some pots. The gloves, rake and shovel were Internet sourced which I resized, printed and fussy cut. Like Sam I created a tray even including handles and I added some tiny flowers I’ve had forever and incorporated a few die cut leaves as well. The window is an A.I. die and the scene in the window is cut from another item I saved, which I think came from a chocolate box or similar. The wood grain paper is a dollar store product and the counter top is from my stash. I hand made the sign adding some cord and a tiny gem to hang it from. I did the same thing with the gloves and also with the saw hanging on the inside right panel. The planter is from my stash and I cut it down to make it work better and disguised the section where I added the piece together, with flowers. My flowers and leaves were sponged with distress oxides and I coloured the two pots with a copper marker and then some Sakura gel sparkle. I figured out how to add the watering can so the card can still be folded flat although as we see our friend often I’m hoping to give it to her rather than mail it.
When I began the card, I wasn’t really thinking about adding it to any challenges, but after checking a few I found that it does fit into some themes so I’m going to add it to the following:
Our current challenge here at Double Trouble, is to use 3 layers, 2 pattern papers and a sentiment, but you can also use the sketch at TSOT # 677, and make a fan card which is what I chose to do. They look difficult, but are actually easier than one thinks. Due to backlinking I cannot enter my card into the TSOT challenge, but it is an example of combining the two challenges for anyone interested.
I followed a tutorial found HERE as this person had changed sizes to an A2 style which is my preferred size to use. Also one of my stamp buddies has done a card like this and she recommended the same tutorial.
My card uses a mat gold card base, PP from CTMYH, small piece of PP from a paper pad, a sentiment from Spellbinders, a Hero Arts die cut, and my butterfly is from StampinUP. I may not be correct about the PP being from CTMYH as I’ve had it for a long time and I don’t remember this pattern from StampinUP. I went around the sentiment die cut with a Spectrum Noir marker in navy to match the dark PP. It is quite an effective card visually and fits into a regular size envelope.
Thanks for stopping by, I appreciate you and your time.
As you can see from the above graphic, the challenge specifies no flowers at Seize the Birthday.
Having seen something like this on Instagram recently I wondered if I would be able to create something similar and this card is the result. Prior to adding the angled masking strips I used some tape to mask off an area that would become the sentiment space. Then using Gina K masking strips I masked off each section in angles. With some additional paper to mask as I was sponging, I proceeded to add colour in each space. Even with masking carefully I still managed to mess up a couple of edges, but not badly enough for me to have to begin over. The card I saw, had the artist using markers to fill in colour and then different colours in circles over each area creating a kind of Bokeh effect. In mine I used inks and sponges and then a stencil from TCW called crazy waves and sponged white pigment ink through the sections. Although it was visible I felt it needed a lift so I brushed Perfect Pearl powder in white over the top and the ink caught the shimmer really well. My butterflies are from Scrapbook.com and I used a pale lavender shimmer piece for the bodies with gold mirror for the pattern pieces. I also used a small body die from StampinUp to create the bodies for the butterflies as to my eyes they needed it. I used a Hampton Arts stamp to add the sentiment, masking off the unwanted word before stamping as the sentiment was too long and I didn’t want to cut the stamp. I backed the rainbow layer with foam tape and then added it to the card front. A few small clear gems and my card was finished. The most work was creating the masked off areas before adding colour.
I’m quite pleased with the end result and because I had inks and sponges out I did another slim line piece for a different card you will see in a future post. Thanks for stopping by, I appreciate you and your time.
We’ve had 48 hours of rain, which has lessened the fire danger dramatically and enabled fire fighters to keep a handle on a bad one burning up island. It has also ensured a lot of the smoke has dissipated which is good for all of us, but in particular people with chest conditions. I feel a sense of relief and although more sunshine is coming it isn’t likely to be as hot as the past couple of weeks have been.
The challenge at As You See It is: Challenge #354 – Dining Al Fresco. These days I’m not into sitting on beaches or on the ground in parks so I chose to keep my design as a more refined way to be outside. It is also our 45th anniversary tomorrow, which we both find hard to believe. I may give this card to my hubby which will make him laugh. Why? Well we usually forget our anniversary on the actual day and it has become a joke between us.
As it happened, I had this frame already cut on my desk because my original thought was to make a tablecloth and add things to it and I had the paper ready. After pulling it out various stamp sets I couldn’t find anything I liked that worked with what I had in my mind so instead I die cut the paper into this frame. Didn’t have time yesterday to do more but today I found this image and decided it would work. The stamp set used is from GKD and I stamped in black and then heat embossed clear. I added the birds by hand after sponging a bit of ink to give the look of sky. The sentiment is from a small YNS set and I cut it with an Infinity Oval from Hero Arts. Went around the edge with a marker and added the tiny heart. The corner hearts are the fallouts that I coloured solid red added a touch of glitter and Nuvo drops for dimension.
I’m actually pleased that I went in this direction rather than with what my original idea, as it has worked quite well and the card is more CAS. Thanks for stopping by, I appreciate you and your time.
Lavender House Creations 