CAS hugs

AAA Cards Challenge #282: Follow the Leader is the current challenge and this is my take on it. I have often thought of doing a card in this design, but never got around to it until now. Using Hero Arts infinity circle dies I first cut the white layer at the edge then using the waste piece from that, I die cut the smaller circle. My red layer is from a Divinity Designs paper pack I’ve had forever and I added the white onto that. Using a new stamp set that was part of a kit from Crafters Companion I stamped the seed head onto the small die cut and heat embossed, after which I added it to the center of the white layer. With a sentiment stamp from the same set I initially stamped directly to the card front but somehow I managed to smudge it and it wasn’t good enough to use for anything let alone a challenge entry. I set it aside until a few minutes ago, as, while I was searching for something online, I realized that I could perhaps stamp it again on another scrap and then die cut it using a heart die, (another infinity die actually). It did the job perfectly and adding the heart was a good idea as most of the DT’s used a tiny heart in their samples. It always amazes me how our brains work, because I wasn’t even looking for a solution when the idea popped into my head.

This card will go to my friend who after 6 months of chemo, has just had major surgery (mastectomy) and it will cheer her up I’m sure. Thanks for stopping by, your time is always appreciated.

anything but square

Our current challenge at https://cardz4galz.blogspot.com/ has been chosen by Helen and we’d like to see anything but square creations. She will also be choosing the winners.

I chose to make a shaped card using Hero Arts Oval infinity dies and I carefully placed the biggest die so that I could keep the folded edge. The other layers were cut in the usual manner. The florals are from an unbranded stamp and die set. For the longest time these were in a box on my desk as I wasn’t sure I liked them after I had made them. Recently, I had the idea of layering some of them together which gave a nicer flower. I used some shimmer on top of the layer stamping so there is a subtle shine to them.

For now there is a generic sentiment inside the card, which I think will be all I shall use. Adding a sentiment to the front seems to me unnecessary. I also cut a small straight section at the bottom of the card so it will stand up nicely.

We look forward to seeing your creations in our gallery and hope you have fun with your designs. Thanks for stopping by, your time is appreciated.

glitter butterfly

SOS539 – Glitter Me Happy is the current challenge at Shopping our Stash and then Seize the Birthday wants us to use something new. Reminder #297-Use Something New.

I’ve just received some new EF’s and dies from StampinUP so this card works for both challenges. I chose the butterfly 3D folder and the dies that go with it. After embossing the panel I sprayed some sparkle spray and set it to dry. Then I die cut the the butterfly base and embossed it and cut 2 of the top layer, one in white CS and one in the purple glitter paper. I glued these 2 together so there was more stability for the top layer. Using a silver Nuvo glitter pen I went over the bottom layer to get it glittery. I did this twice to ensure good coverage. When it was fully dry I added the purple top layer attaching only under the body section, then I added the black body on top. I stamped the sentiment using an MFT set, but used the die from StampinUP to cut it. Using 2 tiny heart stamps from a YNS set, I stamped them at the end. Initially I tried stamping directly to this strip, but messed it up so I stamped again on scrap and fussy cut one to cover it. I also went around the sentiment strip with the silver glitter pen. It is very subtle so hard to see on the photo. After backing the layers to a silver piece it was all added to a white card front.

My hubby really likes this card and I hope that you do too. Thanks for stopping by, your time is always appreciated.

postage style layout

It has been some time since I played in this particular challenge, but I liked this mood board and really wanted to try out my new die and stencil so I used the inspiration from there. The Card Concept #213 {Winter Solace}. I liked the colours in the mood board. I’ve never done anything like this before and am not 100% sure I like the result, but as with anything new, it takes time to figure out how things work best. It did give me an opportunity to use some small stamps that I’ve not used much in the past, all from different sets. Some are GKD, another is Kitchen sinks and another is MFT.

I guess I would categorize this as Mixed Media/Clean and Graphic based on the descriptions Card Concept uses. I sponged or brushed some colour through the stencil and when dry I began adding the images using Versamark ink and heat embossing as I went.

As this die and stencil are a U.K. brand (Woodware) they are slightly different to our sizes so I had to cut the panel down a bit to get it to fit onto the card front. I got them on sale at a Canadian online store called Scrap Chicks. It is fun to have a few new things to play with.

Many thanks for stopping by and also for any comments you may leave. I enjoy reading your thoughts. As I didn’t have time to finish this post yesterday I am looking at it with fresh eyes, which means I like it more now than I did.

special thanks

White-on-White Challenge at Double D and Just Add Ink #734…Something New Blog Hop! are two challenges that inspired this card. The folder is brand new and is by Memory Box, Open Studio and it came with two matching dies. I love white on white and am always fascinated with how different white can look on various card stocks. I started with the embossing and then die cut the two flowers which I also embossed. I added a tiny amount of green to the stems using a pencil. To give them some additional life I added some Versamark and heat embossed some white/glitter powder but the photo doesn’t really pick it up. It is very sparkly on my desk. I added a little more sparkle with some stickles.

Taking another piece of CS I roughed up the edges added some Versamark and heat embossed with the white/glitter powder. This piece was added to a card front and the embossed layer was added using a thick foam tape. The additional flowers were popped up on a thin foam tape. The sentiment and flourish were leftover from a previous project and I thought they worked well for this card so I added them. Finished it with some small Trinity Stamp embellishments. These particular ones pick up any colour around them which makes them an interesting addition.

Thanks for stopping by. I hope you are enjoying a nice day wherever you are.

bird-day greetings

Challenge #339 – Winter Frost is the latest challenge at As You See It and this one is a colour challenge. I thought about a design for a couple of days and then sawsomething in the group from GKD, by Karen Hightower, that was set out like this one and I went with that. My colours are as close as I can get with what I have using Distress inks and card stock from different sources. Card base is a darker basic gray with a slate gray background for the rest of the card. Ribbon is from my stash – no idea where I got these and I’ve had them for a long time. Stamp set is from YNS and the EF is another oldie that I have no name for but it definitely is a brand not a knock off. I did the birds and the balloon initially on some scrap CS and heat embossed them so I could add more colour. When they were dry I fussy cut each piece but took off the legs and the string. Then I added foam tape to the bodies and laid them on the top piece temporarily so I could lay out the stamps again. I re-stamped everything in Hickory Smoke and heat embossed for more definition. Then I added them fussy cut pieces on top so the birds now had their legs back as well as the balloon it’s string. I had cut the dry embossed piece to size, added foam tape and then added it to the lighter gray panel. Added the top portion the same way and left a small gap between the two. I wasn’t happy, so I had the idea of adding the ribbon which I liked much more. The sentiment was stamped and heat embossed but this stamp has a slight fault in it at one end and I tried several times to remove it. Nothing worked so in the end I angle cut the strip on both sides. It isn’t perfect, but better than the original. Too bad the company has gone as I would ask them for a replacement stamp if I could. I may try to cut the fault off, but it requires a very steady hand and I’m concerned I may ruin it completely. Overall I’m happy enough with the card that I am posting and entering it.

Thanks for stopping by, your time is appreciated as are any comments you may leave.

Stencil wonder

Happy New Year everyone! The first challenge of the year, at cardz4galz, is to use stencils. The theme is chosen by Lynda and she will also choose the winners.

I haven’t used stencils anywhere near as much as I probably should, so this challenge is a good one to get me using them. I had this scrap piece of square card and a new stencil from Crafters Companion to use. I also had some new stencil butter from TWC, and decided now was as good a time as any to try it out. The stencil is a multi pattern one so I chose the section I wished to use and when it was completed set it aside to dry. While it was drying I added ink to the die cut butterfly – from MFT – and then used another of the stencil patterns on top. It needed a bit more definition so I added the black body with a glaze pen and some stickles in gold. This was set aside to dry and as the other piece was now dry I went around the edges with a darker blue and a third part of the stencil until I was happy with the coverage. The sentiment is a freebie from Catherine Pooler I think. I inked around it but didn’t like the result much. In the end I used a black glaze pen on the letters and when fully dry cut the sentiment by hand. This I liked much better so I added foam tape and placed it as you see. The butterfly was added and then the entire panel added to a Navy blue card front.

For someone who doesn’t use her stencils much, this card in nothing but stencils and I’ve surprised myself in the process. Thanks Lynda, for helping me to do something outside of my normal comfort zone.

Thanks for spending time with me today, I appreciate you and your time.

I’ve been invited to share this card at https://stencilfun.blogspot.com/ so I have just added it there.

sweet friend

Color Hues Color Challenge #101 – Red & Kraft As you know I don’t do a lot of stenciling but I’m trying to change that and this is one of my efforts. I took a, gifted to me, homemade puzzle heart stencil, some Kraft CS and Festive Berries ink and added the heart. With the ink still wet I added some clear heat set embossing so it has some shine. Initially I wasn’t quite sure where I was going with this card so I set it aside for a few hours. Then I wondered what it might look like if I added some ribbon and found this shiny twine which I added. It needed more so I pulled out a homemade dotted circle stencil and using a brush and some Vintage photo I added the small circles randomly.

The sentiment is from a small Creative Expressions set to which I added the silver scroll that was leftover from a different card. I was satisfied with the end result and in fact, actually like the card. Its always a bonus if I really like something I make as a lot of the time I don’t.

Thanks for stopping by, I appreciate your taking the time.

Stenciled thanks

With the holiday and having guests, I haven’t been spending much time in my craft room, but I did do a lot of clean up prior to Christmas Day. I found quite a few scraps and have since spent some time using them as well as trying out some new supplies. I have a few ready and will likely start posting them over the next weeks.

The card here is using both a scrap frame as well as a new stencil from Crafters Companion. It’s also using an old word die set that came with my Gemini. I used a part of the new stencil over the top of my ink blended piece using water on the stencil, waiting a moment and then lifting it off. It worked quite well and I liked the end result. Decided to use the frame to highlight the nicest part of the stenciling and added the word and small scroll top and bottom.

Its a very simple card and I’m quite pleased with how it turned out. I shall be entering this card into the challenge at Inkspirational.

Thanks for spending time with me today. I hope you all had a lovely Christmas and wish you a very Happy New Year too.

Skating By …

Billie has chosen a Christmas theme for our last challenge of the year here at Cardz 4 Galz. I actually made 3 cards almost the same except for colours. I used a Christmas background stamp from YNS and heat set it with Verdigris on vellum. After cutting the panel down a little I added the sparkly strip to ground the penguin image. He is from a new set, on sale, by Crafters Companion. Once stamped I also heat set the image so I could colour without worrying about it spreading in places I didn’t want. Watercolour pencils were used. When it was dry, I fussy cut the image and used a black pen around the edges. After adding foam tape he was attached to the vellum piece, which in turn was attached to the shimmer card front. The sentiment is from the same set. The other 2 cards are the same except one is blue and one is gold.

When this set and another similar one arrived, I was surprised at the size of the image stamps. I was expecting them to be smaller. There were no matching dies that I could see, unfortunately. I do like the fonts used for the sentiments.

Thanks for spending time with me today. We look forward to seeing your creations in our gallery. Above all, have fun in your crafting space and enjoy the Christmas season.