The dark background piece is embossed but due to the tone of the CS hardly shows up on the photo. I did another one of the corner which hopefully shows the embossing a bit more, otherwise you have to take my word that it is embossed. I used a folder that I call leaf pattern but I don’t know who makes the folder unfortunately. I had thought I would use this card in a different challenge as well, but I don’t have the theme quite right so for now it is only for the challenge at CYHTP. The PP is from a pack that came in a SSS kit and I’ve not used very much of it. The oval is a leftover precut piece that I inked and then stamped the silhouette image on top. It came from my new MFT set as did the sentiment. I used some MFT cloud dies and added them to the oval.

I hope you are all enjoying a nice day and that the weather is being kind to you too. Thanks for stopping by.

Wow, I’m on a roll today as I’ve managed another card that works for more than one challenge. This one was a very easy card to create and typing the post is going to take longer than the making of it was.

The sun stencil is one I’ve had forever and dates back to a kit I acquired from Readers Digest. This is the first time I’ve used it but I like that the sunshine is not the usual rays and the new MFT stamp kit I’ve just received had both the image and sentiment in it. I used two different yellow inks for the sun and then basic black for the rest. I am really pleased with how it turned out and having it work for two challenges is a bonus.

Thanks for stopping by.

Getting a card that will work for more than one challenge is a challenge on its own, but I managed it and mine works for three challenges. The card will be entered into the Peace On Earth, Caffeinated and Just Add Ink challenges this week. As you can see the mood board and the coffee challenges feature rainbows and Just Add Ink is a sketch challenge.

Using a printed rainbow striped Vellum purchased at a local dollar store I added a piece to cover the card front. I also added the last inked piece leftover from a stencil challenge near the bottom so the focal image would be grounded. The stamp/die set used is one from Your Next Stamp and I basically stamped, coloured and die cut the pieces including sentiment and then figured out placement of same. Once I had things stuck down I added the embellishments from my stash. I did die cut a few extra marshmallows and added them as if they were ready to jump into the cup, because the top seemed a bit empty.

This is a fun and cute stamp set and I’m glad I purchased it when YNS had a sale recently. Thanks for coming by to look and thanks for all comments.

I acquired a few new dies recently and this card features one of them. Most are unbranded but this particular one is by Kokorosa. I cut it twice, once in white CS and then with some alcohol inked background that I made a while ago. Layered the 2 together and then placed them so I could figure out the raindrops placement. Once the raindrops were stamped using a Designs by Rynn set and Lost Shadow ink I glued the die cut on top. Then I glued the panel to the card front. Using some Nuvo Chrystal drops I added it to the rain drops to give them dimension. An umbrella die I’ve had forever but cannot remember who by, was what I used next. Cutting 2 one in dark CS and then one using a scrap of leftover stenciled CS. I cut off the parts I didn’t require and added the colourful part to the dark one. Using a doubled piece of foam tape in the middle I popped it up onto the die cut. The frog image is from a SSS set and I coloured him using Inktense pencils and Sakura glaze pens before fussy cutting and then adding to the card front. The sentiment at the side is from a vertical greeting set from GKD. I also added a Hoppy Birthday greeting to the inside of the card.

Thanks for popping in to take a look and I wish you all a Happy Easter weekend.

At Cardz 4 Galz the challenge is to make an easel card and this is my version. The paper I’ve used is from Close to my Heart and I’ve had it for a long time. The stamp set is from A.I., the bigger hearts were cut using Hero Arts Infinity dies and the smaller ones from a die that I have no name for, but I think it maybe Sizzix. The card stock is cut at 5″ by 11″ and then scored and folded to get what you see here. Once the PP was added it was easy to pop up various elements to get the end result. I love this stamp set as it is such a fun one. I also have a similar with Panda’s and they allow for some amusing cards. It isn’t too bulky for mailing and of course folds nice and flat.

Thanks for stopping by and have a great day.

My new stencil arrived the other day and I decided it was perfect for this new challenge. The Stencil is by Creative Expressions and is called Feathered. Having just seen a video by Bibi Cameron about using Colour bursts with a stencil I decided to give it a try. Using watercolour paper, subsequently cut down for this card and using Pixie spray to hold the stencil in place, I sprinkled various colours on top. Then I carefully misted it so it would mix. This is the result and I like it. I may do more of this as it is the easiest way to stencil for me. As the design wasn’t as positive in one area I used the butterfly to cover it. I can’t remember who makes the die but it is in 3 parts. I added some glitter to the black body section before adhering it. The sentiment is from a gifted to me set by GKD and the dots are called gum drops by Your Next Stamp.

I like the vibrancy of this card and it is really striking in reality. Thanks for stopping by.

A recent wildlife magazine arrived and the envelope featured a graphic which was a circle with a ton of different species put inside sections and I immediately wondered whether I could do a card that would use the idea. This is what I came up with. Using the JUG’s chosen colours I inked half the circle with one and then the other half as you see. Then I picked out all those little stamps that so often don’t get used and stamped all over the circle till it was as full as I wanted it to be. All the stamps come from different sets which would take forever to list so you just have to trust me. When it was complete I spritzed the entire circle with Perfect Pearls and left it to dry. I had already die cut the center circle and I stamped it with a few more of the stamps added some shimmer with a rose gold sheen and adhered both pieces to the card front. I cut off the overlapping bits and then added the sentiment at a slight angle to the side. A few Pops of Color dots and I called it finished.

For a change, I think I achieved a good result with the colour match. I used Tattered Rose and Bundled Sage Oxides. I had fun making it although I’m not sure I really like it. As with many others, I reserve judgement until tomorrow as often I like the card better after stepping away from it. Hope you are all having fun and have a bit of sunshine in your lives too. Thanks for popping in to take a look.

When I look at my photograph it appears as if the ink is more orange than peach and the bow and edges seem more pink. I don’t have an exact match for a peach colour, but I did my best nevertheless. I first dry embossed the Kraft panel with a folder by Craft Concepts called in bloom. I added the peach paper behind it so just a small border is visible and then attached it to the card front. Using a die set from StampinUp I cut the daffodils and leaves out of white CS and then added inks to give some colour. The butterfly is from the same set and the bow is a new unbranded die I’ve just received. Once I was happy with the placement I adhered it all as you see and then added the sentiment which is from Itty Bitty Basics by MFT. As I write this I realize I have forgotten to add three small gems that I had ready so they will be added after the fact as I’m too busy to redo the photo.

Thanks for stopping by!

The challenge at Just Add Ink is to do a card with no stamping and if I had been thinking properly when I made the card I posted yesterday, I could have linked it. Instead I made another card using the same theme only this time I had more time to do it. I basically used the same die set from Hero Arts, but instead of a man on the surf board I used a woman. When cutting the main part of the wave I did 2, one in white and one in the darker teal. I offset the teal slightly when I added it to the white. Then I added the rest of the pieces on top. I also added some birds from this set too. As well, I added a sun which is die cut from a SSS die and clouds cut from and MFT set. I added a bit of silver sparkle to the cloud edges and a tiny bit on the wave curl. The sentiment comes from an idea-ology pad and seemed appropriate for the image. While I was die cutting I did some extra clouds and have fixed yesterdays card so it looks better, at least to me.

Thanks for looking and commenting. I appreciate it. Hope you have some sunshine too. It has been a lovely spring day for us here.

I made the time limit with 1 second to spare and its a good job that perfection isn’t expected, because my clouds are a disaster. I don’t know how other card crafters get such perfect looking clouds as mine never look good, but doing it in a hurry is a recipe for no success.

Once I had an idea in my head and had picked out the CS and dies I began by die cutting the wave along with the surfer and board. I quickly attached the surfer to the board and then went onto the wave. Of course the fallouts didn’t fall out as they should and it took a minute to pick them out. Huge sigh of relief when that worked without damaging the die cut and I added the two coloured sections to the main white wave. Another minute wasted in trying to decide where the surfer would go and I decided in the ‘pipe’. I added some glue and tucked him under the curl and over the rest. Silly me he also got glued to the card front and the wave wasn’t yet attached. A frantic couple of minutes trying to glue the wave without pulling the whole thing off the card front. The timer is ticking and I still hadn’t done the sentiment or the clouds. A bit of sponging and a quick stamp of the sentiment and it was done. I shall have to fix the clouds before giving this to someone, but on the whole it isn’t a bad effort.

Stamp set is from a Hero Arts card kit and clouds are created with a SSS stencil. Anyone with a good idea of how to repair my clouds please share. Thanks for taking a look, I appreciate your time.