As most of my Stamp buddies know, Halloween isn’t my thing, but once in a while I do make one of two. I started this card before my craft room install and before my guests arrived, but didn’t have time to finish it so it has been sitting on my desk for about 8 days. I originally intended it for the 6 item challenge over at JUGs, as well as for this challenge, but missed the deadline, so instead of adding 6 bats I decided to do a witch and a couple of bats. Stamp set is from GKD called Wicked. I stamped the railings first and heat embossed then sponged, brushed in the background colours after masking off the moon. Added the colour to that after the rest was finished and dry. The witch was stamped on a scrap piece, heat embossed then fussy cut. I popped her up on top of the moon, added the bats and then the sentiment which I cut into 2 pieces. Considering my lack of interest in Halloween I’m happy with how this one turned out. I don’t have anything skeleton related so a witch is the best I could do.

It is an honour to win a challenge, but even more of one to be able to add a card to the design team list. With this weeks theme being a Tic-Tac-Toe I chose the top line of the choices given.

The products used are as follows: Itty Bitty Basics from MFT, Gina K Designs Peach Bellini CS, PP from StampinUp, Harmonius Hibicus background stamp from MFT, A single flower Hibiscus rubber stamp from Card Craft Stamps #48452, Embellishments from my stash, white and gold heat embossing powders with Distress Oxide inks – abandoned coral, scattered straw and twisted citron, perfect pearl powder and a shimmer water colour from ColourArt called Moonbeam.

After using my Misti to stamp and heat emboss the background, I then added the inks blending the coral and scattered straw together. Twisted Citron was used for the stems and leaves. Once the inks were dry I proceeded to add the blue watercolour to the background keeping it as soft as possible. I left the panel to dry before cutting it down to add to the CS. I heat embossed the single flower in gold and then added inks in the same colours as the rest but keeping the flower center a bit stronger in colour. I fussy cut this flower added some foam tape so it could be popped up onto the PP belly band I had added to the background panel. I stamped, cut and added the sentiment pieces as shown and finished it off with some gems. I have a small strip left over from the background piece to make another card.

Fortunately I managed to finish this late yesterday afternoon, because not long after we received word that the installation of my craft room is to begin today and in fact, as I type is in progress. I don’t expect to be crafting today at all and possibly not till next week unless I can get things put away properly and organized quickly. I’m so excited to know that my space will be functional very soon.

The photo inspiration made me head in a direction using dies and paper in some of the colours shown in the photo. I used a Memory Box die called Sketchy Rings, a Nestability type set (can’t remember which company) and 3 border dies that I think are by Spellbinders. I don’t have access to them at the moment and forgot to write down the products yesterday. The PP is from an old 6″ by 6″ paper pad and fit the colours so I used it. Card front is gray from GKD, but in the photo it looks bluish. After cutting the sketchy rings in yellow I cut the background piece in turquoise, which looks darker in the photo and then I added both to the card front. I cut a 2nd sketchy ring using the pp and paper pieced the inside main circle. Using the same pp I cut the borders and after some playing decided they looked best on an angle. I wanted it all to be about curves. When searching for the PP I found a Tim Holtz Idea-ology pad with the sentiment strips and decided on the one you see here. At first I thought I wasn’t going to like the card, but in fact I do and am happy with it. It is a bit chaotic but it works!

I had this frame leftover from a previous project which was part of the new die set by Recollections, and before it got lost in the mess of my desk I decided to use it. As well the stamp set is a new one that I hadn’t used yet, by Joy Clair Designs. It is one of the sets that was tied up in the border closure last year. This set seemed perfect for this challenge and I used the cherries and the lemon slice to meet the fruit requirement. I added some colour using InkTense pencils and then a Sakura glitter pen. Added the tiny gems but managed to keep it fairly CAS for a change.

I keep looking at this card thinking it needs more, but it is a CAS card and if I add anything I’m sure to spoil it. As well it’s supposed to be one third or less so adding to it would negate that requirement. The zebra rubber stamp is ancient and is from Stamp Francisco. The sentiment was a gift in a purchased set from Kitchen Sink stamps. I don’t think I could get more CAS than this.

In my memory I knew I had a stamp showing the word Noel, but it took me a good 30 minutes to find it. I thought it would be perfect for this challenge so it was a relief when I found which box it was in. I started by heat embossing the word all over the panel in white. Using a star stamp from another set I filled in a few spaces with the stars and heat embossed them in gold. I then inked in various distress oxide blues to create a night sky background and sprinkled some water to add more faint stars. All stamps used come from different GKD sets. After stamping and heat embossing the deer I added a touch of colour to his scarf and booties before fussy cutting around him. Using foam squares I popped him up on the card front after adding a small glittery snow bank to ground him. I met the challenge twice by using the word Noel and creating a night sky so I’m happy with that. At least it is another Xmas card to add to my small stash.

The recipe for this challenge was easy to follow, but it always surprises me how my brain can get stuck on something. Once I got it unstuck the card evolved easily. Supplies used include a piece of CS from the Craft Core – shattered collection (close to crumb cake in colour), an EB folder from Sissex Tim Holtz called Bricked, gingham ribbon from my stash and twine also from my stash, an old stamp set purchased years ago from Michaels but the actual brand I don’t know, all various silhouettes with the wheat being one, and a sentiment from a GKD set called Frames and Flowers. The little embellishments are also from my stash. Sadly I needed a sympathy card. I started by embossing the background and then added both the ribbon and the twine before adhering to card front. I stamped the wheat and heat embossed before fussy cutting it as you see here. Heat embossed the sentiment before fussy cutting around that too. The embellishments had to be searched for but work great once I found them. It is a fairly simple card but I’m happy with the result.

My new SSS stamp kit arrived today and I couldn’t resist using part of it to make a card. I liked the sketch idea at Make the Cards, (a new to me challenge site) and this is what I came up with. I cut some strips out of the plaid paper and added them to the card front. Using a Hero Arts Infinity die I cut the circle and stamped the frog. He was coloured using InkTense pencils and some Sakura glaze. I added the googly eyes and stenciled a small lily pad underneath him. This is partially covered by the sentiment strip also from the kit. Stamped the butterfly and made a booboo so covered that with a small bee button that I cut the back off to make flat. This is a fun kit and I shall have lots of time to play with it more fully soon.

Recently the Cats Pajamas decided to go fully digital and consequently they had a sale of existing inventory. I took advantage of the sale and bought the stamp set and matching dies. These stamps were perfect for the Double Trouble challenge this week where they want a mix and match of dots, stripes and plaid. I used Distress inks in Rusty Hinge, Aged Mahogany and Lucky clover to stamp the bird houses. Then I used the dies to cut them out. What I didn’t realize until using them was that the die cut everything separately so I had to piece it all together which was a pain and very fiddly especially when I was trying to pop them up. Also I stamped first and then cut which meant I had trouble lining up the dies and I wasn’t happy with the cuts. Note to self is to use my Misti to cut them first and then stamp through the space. I used Sakura Glaze pens to colour in some of the uneven white edges. Instead of stamping the bird, I used the die alone on some gingham paper. Background piece is from an old paper pad and I added some raffia twine underneath the houses. Sentiment done in Aged Mahogany then clear heat embossed. In spite of the frustration with the fiddly parts I quite like the end result.

As mentioned I am finally uploading a couple more puzzle cards using my new Hero Arts puzzle die . Inspiration came from both the Hero Arts blog and from Pinterest. The first one I made into a heart shape by building up the layers of pieces. I used some StampinUp pp for the design on both. How I used the brads on the first one is shown here. Added the layers to the card front and then added some ribbon as explained in the link. A few gems just for a bit of sparkle.

On the second one, I took out a few of the puzzle pieces leaving an empty space and then I adhered the whole thing to a scrap of black cs. Taking some of the PP I cut out a couple of butterflies and added them almost into the empty space. Used a heat embossed sentiment strip by MFT. These were fun to do and have a nice effect too.